StarBoard Link EZ2-Pen Скачать руководство пользователя страница 32

Страница: 32 / 37

4-2

StarBoard Link EZ2-Pen

Appendix

English

Recognition-Related Problems

Problem

What to check

What to do

Touch Sensor Error
(USB error)

The controller must be reset

and the system restarted.

Disconnect the USB cable and

reconnect it. If this does not solve the

problem, restart the PC.

In case that USB cable

extended as bellow, it may

result in unstable of product

working.

・

USB extension cable other

than bundled one

・

Bus-powered USB hub

・

USB extender

When connecting to the PC, use the

bundled USB extension cable.

If you need to extend USB cable, use

self-powered USB hub.

Touch Sensor Error
(Insufficient USB
bandwidth)

Is a high-speed USB device

connected to the USB host

controller used to connect the

StarBoard?

Be sure to connect the StarBoard and

any high-speed USB devices to

separate USB host controllers.

In case that PC only has one USB host

controller, use self-powered USB hub.

Input-Related Problems

Problem

What to check

What to do

The input position does

not match.

Has position alignment been

performed properly?

Perform proper position alignment.

Other than the above

Contact a support center.

The position cannot be

aligned properly.

Have the StarBoard and

projector been placed in the

proper orientation?

Adjust the position of the StarBoard

and the projector. If undue correction

is performed, it may not be possible to

align the position properly.

Is the PC screen being projected

inside the StarBoard's input

area?

Make sure the PC screen projection is

contained within the StarBoard's input

area.

（

For details on the input area, see

page 1-3 of this User's Guide.

）

StarBoard Software files may
be broken or installation may
not be complete correctly.

Uninstall the StarBoard Software and

then re-install it.

（

For details on installing StarBoard

Software, see the StarBoard Software

Installation Guide.)

Other than the above

Contact a support center.

Содержание Link EZ2-Pen






































Результаты поиска

Содержание Link EZ2-Pen

Отзывы:

Бренды по названию

Популярные бренды

StarBoard Link EZ2-Pen, Руководство пользователя

Результаты поиска

Содержание Link EZ2-Pen

Отзывы:

Бренды по названию

Популярные бренды