Star SP2000 Series, Руководство программиста, Страница: 40 / 81

38
2) N = 1 (Star mode only)
n1: Always “0”
n2: Always “0”
Parameter Setting
“0” (Default)
“1”
n3 Zero style Normal Slashed
n4 International See below
character set
When memory switch N = 0, n3 = “0” (Destination is standard),
this setting is valid.
3) N = 2 (Star mode)
n1: Always “0”
n2: Always “0”
n3: Always “0”
Para. Setting “0” to “F”
n4 Comdex Dual Auto Cut mechanism (*1) See below
Paper near end sensor
n4 Country
“0” USA
“1” France
“2” Germany
n4 Country
“3” UK
“4” Denmark #1
“5” Sweden
n4 Country
“6” Italy
“7” Spain #1
“8” Japan
n4 Country
“9” Norway
“A” Denmark #2
“B” Spain #2
n4 Country
“C”
Latin America
“D” Korea
“E” Ireland
“F” Legal
n4 Paper near end sensor
“0” or “4” or “8” or “C” Invalid
“1” or “9” or “D” Invalid
“2” or “A” or “E” Reflects status of sensor to STATUS
and when near end, does not go offline
and does not stop printing.
“3” or “B” or “F” Reflects status of sensor to STATUS
and when near end, goes offline and
stops printing.