Line feed
23
Line feed
o Make sure the printer is off-line (
ON LINE
indicator is not lit).
o Press
LINE FEED
once to feed paper one line. Holding down
LINE FEED
continually feeds paper, one line at a time, until you release the button.
Paper eject (cut-sheet paper)
o Make sure the printer is off-line (
ON LINE
indicator is not lit).
o Press
SET/EJECT/PARK
to eject the paper.
o After the paper is ejected, the printer will beep and the
POWER
indicator
will flash to indicate there is no paper in the printer.
Form feed (fanfold paper)
o Make sure the printer is off-line (
ON LINE
indicator is not lit).
o Holding down
LINE FEED
and press
ON LINE
then the printer will
automatically feed the paper to the top of the next page.
Parking fanfold paper
o Make sure the printer is off-line (
ON
LINE
indicator is not lit).
o Press the control panel’s
SET/EJECT/PARK
button.
o The printer automatically reverse feeds the fanfold paper until it is no
longer in contact with the platen.
Micro feed
Use the following operation to feed the paper in very small increments. This
makes it possible to align the print head exactly where you want it.
o Make sure the printer is off-line (
ON LINE
indicator is not lit).
o While holding down
ON LINE
, press
LINE FEED
to feed the paper
forward or
SET/EJECT/PARK
to feed the paper backward.
