10
●
Installation of the Robot Cleaner
Mounting of the wet ultrafine fibrous mop
Charging
1
2
Mop plate
1. Turn the Robot Cleaner upside down
and then fit the mop plate into the
mounting area of the main body.
2.
※
The threshold mode will not be set
up when the mop plate is mounted
on the device.
Soak the wet ultrafine fibrous mop
into water, squeeze a good amount of
water out of the mop and then mount
it onto the mop plate.
Wet ultrafine
fibrous mop
1. Turn on the power switch at the side of the Robot Cleaner.
2. Align the charging pin located under the main body into the charging station port and then start
charging.
▶▶ The battery level blinks on the display window, indicating that charging has started.
"Lo" in the time display section indicates that no charged battery is left.
3. A green light blinks while charging is in progress. Once fully charged, the battery level remains
green on the display window. A red light turns off at the charging station once the docking stage
has reached.
[Automatic charging when in use]
※ The Robot Cleaner moves to the charging station by itself when the battery level becomes low while
it is operating. Once charging has been completed, it returns to the area left uncleaned, completes
the cleaning job and then returns finally to the charging station.
※ Press the ‘Charge' button on the app in case you want to charge while the Robot Cleaner is operating.
(Refer to Charging on p.14.)
※ The Robot Cleaner is set to return to the area where the cleaning job originally started when the
battery level becomes low. Therefore if the cleaning job started in an area other than the charging
station, it returns to the area where the cleaning job originally started.
※ The Robot Cleaner stays in an operation mode when while the power switch is turned on, but in a
charging only mode when the power switch is turned off.
※ In case you wish to charge the Robot Cleaner manually,
connect the charging jack of the adaptor directly with the
main body.
[Manual charging]
1
2
3
Main body
Red Green
Green
Charging station
power
Charging display
Charging in progress
Changing completed
