15
620-8006 Rev A
ATTENTION
•
Star Trac recommends that Spinner bikes be spaced a minimum of 20.0 inches (0.5 m) apart to allow safe and
easy ingress and egress.
•
As with any exercise equipment, the area where Spinner bikes are located must be free of obstructions and fixtures
with sharp edges to prevent injury in the event that a user trips or loses balance and falls.
Use the checklist below to ensure the proper installation of the bike
1. Rear and front leg assemblies are properly installed and secured.
2. Handlebar post height adjustment moves freely and can be locked in all levels.
3. Handlebar fore-and-aft slider adjusts freely and can be locked in all levels.
4. Seat Post height adjustment moves freely and can be locked in all levels.
5. All screws are tightened and torqued down to the specified torque value.
6. Pop pins are secured and freely engage and disengage mating holes.
7. Seat slider is properly installed and slides freely along the entire range of motion.
8. Seat slider can be locked in all levels.
9. Right and left pedals are properly installed.
10. Resistance knob operates properly and, when applied, flywheel stops
abruptly.
For technical assistance call Star Trac Customer Service: 1 800 503 1221
