36.
Using a rubber mallet; tap the center of each pedal with
medium force to lock the pedals in place (Fig. 36).
Fig. 36
37.
Install the pedal securing bolts (Fig. 37) into each pedal
thru the back of each crank arm using an 8mm hex key.
NOTE:
Torque settings for each bolt should be
between 33-37 lb-ft.
Fig. 37
38.
Locate the load sensor blocks seated at the center of
the bike frame near the flywheel (Fig. 38). Remove the
shim between both blocks.
Fig. 38
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |
25
