Star Trac Instinct Shoulder Press, Руководство пользователя

Страница: 6 / 10

PARTS AND MATERIALS
The following parts are included with the STAR TRAC INSTINCT SHOULDER PRESS
T
OOLS
R
EQUIRED
Most STAR TRAC INSTINCT machines can be assembled using the following tools:
Your INSTINCT SHOULDER PRESS includes a hex key set and combination open-end wrench.
SITING REQUIREMENTS
Your INSTINCT SHOULDER PRESS requires approximately 32 square feet of floor space to ensure safe operation of the unit.
UNPACKING
Your INSTINCT SHOULDER PRESS is shipped in one or more shipping cartons. Each carton will generally contain one sub-
assembly of the entire unit. To unpack:
■
Remove the shipping straps from the outside of each shipping carton.
■ Open the top of each carton and fold back all four flaps.
■
Remove the packing materials, foam inserts, and ALL parts from each shipping carton. Keep the contents of each carton in
a
separate area to facilitate assembly. To ensure personal safety during assembly, place all packing materials outside the
assembly area.
■ Verify that all parts listed above are included in your shipment.
Take time now to enter your INSTINCT SHOULDER PRESS serial number in the space below. If parts are missing, or if you
have any operational questions, please call Star Trac’s Service department at (800) 503-1221; have your serial number ready.
Serial No. __________________________________________
STAR TRAC INSTINCT SHOULDER PRESS O
WNER
’
S
M
ANUAL
15 6 STAR TRAC INSTINCT SHOULDER PRESS O
WNER
’
S
M
ANUAL
A
SSEMBLY AND
S
ETUP
1 Frame, Weight Stack 1
2 Crossbeam, Upper 1
3 Frame, Main 1
5 Leverage Arm 1
6 Crossbeam, Lower 1
9 Shroud, Lower, Front 1
10 Plate, Top, Weight Stack 1
11 Selector Pin 1
13 Shaft, Leverage Arm 1
14 Guide Post, Weight Stack 2
15 End Cap 2
16 Weight, 10lb 3
25 Cushion, Seat 1
26 Cushion, Back 1
27 Shroud, Lower, Rear 1
28 Shroud, Upper 2
29 Support, Weight Stack 2
31 Cap, Rubber 2
32 Retainer, Belt 2
33 Belt 1
34 Nut, Tapped Hole 6
35 Screw, Button Head Socket Cap, 10X130M 6
36 Screw, Button Head Socket Cap, 10X80M 3
38 Screw, Button Head Socket Cap, 10X35M 4
40 Screw, Button Head Socket Cap, 8X20M 6
42 Screw, Flat Head Socket, 10X30M 2
43 Screw, Retaining 2
48 Lock Nut, Nylon Insert, 10M 8
51 Washer, 11M 22
52 Washer, 9M 6
62 Screw, Button Head Socket Cap, 10X30M 2
63 Weight, 5lb 3
64 Weight, 15lb 9
■
Metric Hex Key Wrenches - 2.5mm, 5mm, 6mm, 8mm, 10mm
■ Metric Open-End Wrenches - 10mm, 15mm, 17mm
■ Metric Ratchet Socket Wrench Set (including 17mm socket)
■ Torque Wrench
■
Channel Lock Pliers
■ Vice Grip Pliers
■ Rubber Mallet
■ Phillips Head Screwdriver - #2
L
ABELS AND
P
LACARDS
Pinch Points.
Keep hands away
from moving parts.