Star Trac Inspiration Strength IP-B7510, Руководство пользователя/по установке

Страница: 9 / 16

Page 9
MOUNT BACK ASSEMBLY TO MAIN FRAME:
1. Take the Back Assembly with ROM Plate. Insert the Shaft through the bearings on the Main
Frame. Insert one washer (PN:731-2002) over each side of the shaft.
2. Slide the ROM plate through the window on the Main Frame. Pull the pin and allow it to
engage one of the holes on the ROM Plate.
3. Align the pivot mount on the Back Rest to the Main Frame. Using (2) Caps (PN:731-1265)
and (2) M8 x 25 Socket Head Cap Screws (PN:731-0393), mount the Back Rest to the Main
Frame. Tighten fasteners.
MOUNT CALF ASSEMBLY TO BACK REST:
1. Take the Calf Assembly and mount it to the Back Rest as shown below. Using (4) M8 x 25
Button Head Screws (PN:731-0359) and (4) M8 Washers (PN:731-0355), insert assembly
into the back rest, insert fasteners, once all fasteners are threaded into assembly tighten
fasteners.