Page 9
Headphone Jack - Units with Gen 2 Hotbar
1.
Connect the headphone cable from the PVS
(3)
to the hot bar cable.
2.
Use a #2 phillips screwdriver to remove the PCB-
from the Gen 1 hotbar insert, then install it into
Gen 2 hotbar insert.
3.
Use a 3mm allen key to remove the M4 x 16mm
socket head cap screw securing the headphone
cap into the hotbar, then remove the headphone
cap.
4.
Install the Gen 2 hotbar insert built in Step 1 into
the hotbar, then use a 3mm allen key to secure
the insert using the same socket head cap screw
from Step 2.