4
System requirement
64 MB Ram
200 MB of Harddisk space
Windows 2000, Windows Vista, Windows 7 and Windows 8
Driver installation
The Ranger Reader use serial protocol to communicate with host PC. In order for the host PC to be
able to communicate with the reader, it may be necessary to install the USB to serial driver.
1.
Unzip
“
CP210x_VCP_Windows.zip
”
2.
If your operating system is running 64bits, run
“
CP210xVCPInstaller_x64.exe
”
Otherwise if
，
your operating system is running 32bits, run
“
CP210xVCPInstaller_x86.exe
”
.
3.
Follow the on screen instruction of the installer.
Ensure the reader is connected properly
1.
Go to Control Panel > Device Manager
2.
Open tab
（
COM
和
LPT
）”，
3.
You should see
“
CP201x USB to UTRA bridge(COM X)”where X is the port number
assigned by the PC
