HELIOS ELECTRIC INFRARED IRK
SAFE INDUSTRY MODEL
1500 Watt (cod. EH SAFE 15) / 2000 Watt (cod. EH SAFE 20)
DIRECTIONS
PLEASE NOTE: safe use of this equipment can only be ensured if the user complies with these directions. Users must
therefore keep these directions at hand at all times.
Helios Safe Industry is an extremely versatile infrared heater designed and constructed according to good practice
and assembled with the best components conforming to standards and/or certificates for ensuring safety during use.
TECHNICAL DATA
* ALL SPECIFICATIONS INCLUDED ARE BASED ON TESTS. OTHER RESULTS DEPEND UPON ENVIRONMENTAL
CONDITIONS DURING USE
Mark EHSAFE15
nA IIC T2 Gc
Mark EHSAFE20
nA IIC T2 Gc
ct III B T230° Dc IP66
ct III B T290° Dc IP66
-5°C £Ta£+25°C
-5°C £Ta£+25°C
CONSTRUCTION
* Steel body, oven epoxy powder coating
* Extra-pure, buffed, anodically oxidized aluminium parabolic reflector
* Front (ceramic, glass)
* Silicone rubber seal
* Supply cable: length 1.5 m and; resistant to Temperature = 180° C
* Adjustable wall anchorage
WARNING
PLEASE NOTE: THIS HEATER IS SUITABLE FOR INSTALLATION IN EXPLOSIVE ATMOSPHERE CONDITIONS, CLASSIFIED
ZONE 2-22, PURSUANT TO DIRECTIVES 94/9 AND 99/92 EC ATEX
ZONE 2-22 indicates that the atmosphere, which is normally not explosive during routine use, may, on rare
occasions, briefly become explosive (generally in the presence of a malfunction). The heater therefore cannot be
installed in zones other than those classed as ZONE 2-22.
T2
indicates that the ignition temperature of the flammable
gasses of the classified zone must be higher than 300°C. The table below (from EN 13463-1) lists other temperature
classes.
Temperature Class
Maximum Surface Temperature (°C)
T1
450
T2
300
T3
200
T4
135
T5
100
T6
85
Read the various indications on the name plate. Conditions of use must correspond to the data indicated
on the name plate.
ENGLISH
7
