Star Micronics TSP100 eco futurePRNT, Руководство по оборудованию

Страница: 17 / 36

– 14 –
4. Attaching the Accessories
The following accessories are necessary when mounting the printer to a wall.
• Upper guide and two flanged screws
• Holder plate and two flangeless screws
The following accessories are necessary when positioning the printer vertically.
• Upper guide and two flanged screws
• Four rubber feet
4-1. Attaching the Upper Guide
1) Push the cover open lever, and open the printer cover.
2) Fit the upper guide onto the shaft until the hooks on the guide click into place.
3) Tighten the two screws (M3x6 flanged screws) that were supplied to secure the upper guide
in place.
Hooks
Shaft
Upper guide
Flanged screws