Mounting the Presenter PR921
1. Opening the Package :
Check that all of the accessories are included.
2. Mounting Procedures :
2-1 Mounting the Lock Lever
Screw in the two lock levers into the presenter with
the two lever screws.
2-2 Mounting the Stopper
Screw in the stopper into the presenter with the
screw.
2-3 Mounting the Presenter
1
Install the shaft in the presenter.
2
Lay the release lever on the mechanism side down
and open the mechanism platen holder toward the
direction of the arrow.
3
Position the screw holes, as shown in the figure, and
place the mechanism on top of the presenter.
4
Fasten the presenter to the mechanism using the two
screws.
M3
×
6 screws (3)
(For Presenter/ Stopper Mounting)
M3
×
4 screws (2)
(For Loop Guide Mounting)
Lever screw
×
2
Lock lever
×
2
Loop guide
Shaft
Stopper
Presenter
Lock lever
Lever screw
Mechanism
Release lever
Platen holder
Presenter
Mechanism
Presenter
Screw
80871281 PR921
Shaft
Stopper
Screw
