Star Micronics NL-10, Руководство пользователя

Страница: 28 / 35

22
REPLACING THE RIBBON
This printer uses an “endless” ribbon cartridge, which means that the inked rib-
bon inside is recycled automatically. Eventually, though, printing will become too
faint to read easily and you’ll want to change the ribbon.
However, it is less expensive and more economical to replace only the ribbon
portion inside the cartridge. If this money saving method does interest you, read
on.
Follow this procedure to remove the old ribbon and insert the new one in the
original cartridge (not recommended for people with ten thumbs!).
1. First, obtain from your dealer the correct type of ribbon “sub-cassette”
(not the spool-type ribbons used with some other printers).
2. Grasp both ends of the ribbon cartridge and pull the cartridge up and out
of the printer. (Refer to Chapter 1 for illustrations of installing the refilled
ribbon cartridge.)
3. Unhook the six tabs of the cartridge cover carefully (Figure 3-1).
Figure 3-1. Use a screwdriver to pry open the cartridge.