background image

 

IFBD-HW03/04 Product Specifications Rev. 0.00 

 

3.3.5. HTTP 

Specification 

 

This product supports HTTP.    This means that it is possible to use a Web browser to change the NIC 

and printer settings, display system information when running the product, and view that status of the 

printer port.     

 

• 

Conforms to HTTP 1.0 (RFC 1945)   

• 

Conforms to HTML 3.0. 

• 

Writing is password protected to prevent access by anyone other than the root and 

maker.   

• 

The printer port status display is automatically updated each time it is set by Web or 

TELNET (1 to 300 seconds; Initial value: 10 seconds).  Also, when updated, it 

automatically moves to a position where it is easy to view

 the status display.     

Note: The display of each browser may vary slightly.     

 

There are multiple accounts for setting items necessary for logging in using a Web browser.  It 

supports the user names and passwords outlined in the table below.  The viewable and settable 

items vary for each account.   

 

 

Account

 

User Name

 

Password

 

Target

 

Root User

 

root 
• No differentiation between 
upper and lower case 
characters

 

Can be set 
• Seven or more char. of ASCII 
• Initial Value: No characters 
• No differentiation between upper and lower case 
characters

 

System controllers

User

 

(Any ASCII character string) 

 

None

 

General users

 

 

 

3-9

Содержание IFBD-HW03
















































Отзывы: