1. Front guard
2. Rear guard
3. Blade
4. Switch
5. Tilt adjusting knob
6. Base
PART FIGURE
1
2
6
3
5
4
OPERATING INSTRUCTION
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
1. Set switch (A) to desired fan speed:
OFF-Stop, H-High, M-Medium, L-Low.
2. To adjust angle of air flow,
loosen the two knobs (B)
on the sides of the fan.
Tilt fan body (C) to desired
angle, retighten knobs.
2
