Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. -
10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c
.
Dimensions Weight
Model (A) (B) (C) (D) Number of
Plate
No. Width Depth Height Leg Width Thermostats BTU Grid Area
Thickness Installed Shipping
Inches Inches Inches Inches
Inches Ibs. Ibs.
w(cm) (cm) (cm) (cm)
(cm) (kg) (kg)
624TSPD 24 29 15-1/2 20-15/16 2 56,600 498 sq. in.
3/4 165 175
(61.0) (73.7) (39.4) (52.7)
3213.1 sq cm
(1.9) (74.8) (79.4)
636TSPD 36 29 15-1/2 20-15/16 3 84,900 747 sq. in.
3/4 247 262
(91.4) (73.7) (39.4) (52.7)
4819.6 sq cm (1.9) (112.0) (118.8)
648TSPD 48 29 15-1/2 20-15/16 4
113,200 996 sq. in.
3/4 330 350
(121.9) (73.7) (39.4) (52.7) 6426.2 sq cm
(1.9) (149.7) (159.0)
Units operate on Natural or Propane Gas.
Gas griddles are constructed with stainless steel panel with black polycarbonate trim and double wall aluminized steel side
panels. Griddle plate is 3/4" (1.9 cm) thick, 4-1/2" high tapered wrap-around stainless steel splash guard come standard. Unit
has a 3-1/4" (8.3 cm) wide front grease trough with grease chute and a 4-1/2 quart (4.26 L) stainless steel grease drawer. Unit
is heated by 28,300 BTU aluminized steel burner for every 12" (30.5 cm) of griddle width and is controlled by a throttling type
thermostat. Thermostat knobs are protected by a stainless steel bull nose front. An automatic safety pilot is provided for each
burner. Griddles are supplied with 4" (10.2 cm) high die cast nickel plated steel legs that have a 1-3/8" (3.5 cm) adjustment.
Gas connection is 3/4" N.P.T. male and a convertible pressure regulator is provided. Units are approved for installation
within 6" (15.2 cm) of combustible and non-combustible surfaces and are UL Gas certified and Ul Sanitation listed. Printed in the
U.S.A.
Specifications
Typical Specifications
STAR-MAX
®
GAS GRIDDLES WITH
THERMOSTATIC CONTROL AND SAFETY PILOT
Models
624TSPD, 636TSPD & 648TSPD
D
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
