background image

2

GENERAL INSTALLATION DATA

CAUTION

This equipment is designed and sold for
commercial use only by personnel trained and
experienced in its operation and is not sold for
consumer use in and around the home nor for
use directly by the general public in food service
locations. For equipment to be used by the
general public, please contact the factory.

The Star-Max™ model griddles are equipped for
use with the types of gas specified on the
nameplate.

All units are shipped from the factory for use with
natural gas. The unit can easily be converted for
use on propane gas: see propane gas.

-IMPORTANT-

The installation of the Appliance should
conform to the NATIONAL FUEL GAS CODE
"ANSI Z223.1 - LATEST EDITION" AND ALL
LOCAL GAS COMPANY RULES AND
REGULATIONS.

IN CANADA INSTALLATION SHALL BE IN
ACCORDANCE WITH THE CURRENT
CAN/CGA-B149.1 NATURAL GAS
INSTALLATION CODE OR CAN/CGA-
B149.2 PROPANE INSTALLATION CODE
AND LOCAL CODES WHERE APPLICABLE.

This appliance, its pressure regulator and its
individual shutoff valve must be disconnected from
the gas supply piping system during any pressure
testing of that system at test pressures in excess
of 1/2 PSIG (3.45KPA). This appliance and its
pressure regulator must be isolated from the gas
supply piping system by closing its individual
manual shutoff valve during any pressure testing of
the gas supply piping system at test pressures
equal to or less than 1/2 PSIG (3.45KPA). For
your protection, we recommend a qualified
installing agency install this appliance. They should
be familiar with gas installations and your local gas
requirements. In any case, your gas company
should be called to approve the final installation. In
addition, there should be posted, in a prominent
location, detailed instructions to be followed in
the event the operator smells gas. Obtain the
instructions from the local gas supplier.

FOR YOUR SAFETY

  IF YOU SMELL GAS
  1.  DO NOT TOUCH ELECTRICAL
       SWITCHES.
  2.  EXTINGUISH ANY OPEN FLAME.
  3.  IMMEDIATELY CALL YOUR GAS
       COMPANY.

KEEP THE APPLIANCE AREA FREE AND
CLEAR FROM COMBUSTIBLES.

CLEARANCE

For use on non-combustible countertops
only

.  Combustible and non-combustible material

must be at least 48" (120cm) from the top of the
appliance and 6" (150mm) from the sides and
back. Adequate clearance should also be provided
for proper operation and servicing.

AIR SUPPLY

Make certain not to obstruct the flow of
combustion and ventilation air. Provisions for
adequate air supply must be furnished. Make
certain that air intake openings in the bottom of
the appliance are not obstructed. They are
essential for proper combustion and operation of
the appliance.

WARNING

: Improper installation,

adjustment, alteration, service or maintenance
can cause property damage, injury or death.
Read the installation, operating and
maintenance instructions thoroughly before
installing or servicing the equipment.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR

OTHER FLAMMABLE VAPORS AND LIQUIDS

IN THE VICINITY OF THIS OR ANY OTHER

APPLIANCE.  KEEP THE APPLIANCE AREA

CLEAR AND FREE FROM COMBUSTIBLES.

Содержание CHROME-MAX 624TCHS










Отзывы: