Star Lake SR700, Руководство пользователя

Страница: 54 / 58

SR700 User’s Manual
Revision Date: NOV. 23. 2016
53
Graphics Configuration
Graphics Turbo IMON Current: Graphics turbo IMON current values supported (14-31).
Primary Display: select which of AUTO/IGFX/PEG/SG graphics device should be primary display or
select SG for switchable GFX
Primary PEG : Select Auto/PEG1/PEG2 Graphics device should be Primary PEG.
Primary PCIE : Select Auto/PCIE1/PCIE2/PCIE3/PCIE4PCIE5/PCIE6/PCIE7 Graphics device should be
Primary PCIE.
Internal Graphics : Keep IGD enabled based on the setup options
Aperture Size: Select the Aperture Size.
DVMT Pre-Allocated: Select DVMT 5.0 Pre-Allocated (fixed) Graphics memory size used by the
internal graphics device.
DVMT Total Gfx Mem: Select DVMT5.0 total graphic memory size used by the internal graphics
device.
Gfx Low Power Enable: this option is applicable for SFF only.
Panel Power Enable: Enable/Disable forcing of Panel Power in the BIOS.
LCD Control
Primary IGFX Boot Display: Select the Video Device which will be activated during POST. This has no
effect if external graphics present. Secondary boot display selection will appear based on your
selection. VGA modes will be supported only on primary display.
LCD Panel Type: Select LCD panel used by Internal Graphics Device by selecting the appropriate
setup item.
SDVO-LFP Panel Type: Select SDVO panel used by Internal Graphics Device by selecting the
appropriate setup item.
Panel Scaling: Select the LCD panel scaling option used by the Internal Graphics Device.
Backlight control: backlight control setting
Panel Color Depth: select the LFP panel color depth.
Memory Configuration
DIMM profile: Select DIMM timing profile that should be used.
Memory Frequency Limiter: maximum memory frequency selections in Mhz.
DDR Reset Wait Time: The value of ns to wait for switch DDR voltage, minimum 20ns.
ECC Support: Enable or disable DDR Ecc support
Max TOLUD : Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically
based on largest MMIO length of installed graphic controller.
GT- Power Management Control
RC6 (render standby): check to enable render standby support.
GT OverClocking Support: enable or disable GT overclocking support