Star Lab N2400-0001 Vortex IR, Инструкция по эксплуатации

Страница: 6 / 24

6 Vortex IR
3.1 Replacing the cup head
To replace the cup head, pull it upwards and off. The other push- fi t attachments (see Chapter 6, Ordering
Information) can then be inserted.
4. Maintenance
No routine or extraordinary maintenance is necessary apart from periodic cleaning. In compliance with
the product guarantee law, repairs to the unit must be carried out in our factory, unless previously agreed
otherwise with local distributors (see Warranty, Chapter 7).
4.1 Cleaning
Disconnect the unit from the power supply and use a cloth dampened with an non-in fl ammable non-
aggressive detergent.
5. Speci fi cations
Speed range 0 – 3000 rpm
Speed setting Analogue
Speed control Electronic
Operating temperature range 5 ºC to 40 ºC (max. humidity 80%)
Operation modes Two: sensor or continuous
Type of movement Orbital (4.5 mm Ø)
Maximum load 0.5 kg
Construction materials
Unit: Zinc alloy die cast and technopolymer. Cup head: SEBS
Foamed attachments: PE. Feet: MQ/MVQ. Control panel: PET
Power 15 W
Power supply Input: AC 100 – 240 V, 50 – 60 Hz, 0.5 A. Output: DC 12 V, 1.25 A
Safety Electronic protection degree IP 42-EN 60529. Pollution degree 2-EN61010-1
Weight 2.2 kg
Dimensions (WxDxH) 180 x 220 x 70 mm
Technical speci fi cations subject to change without notice.