background image

-6- 

If you have any questions concerning this or any other product, please contact our 

Customer Service Department

 at (585) 226-9787. 

 

If a product must be returned for any reason, please contact our  

Customer Service Department to obtain a Returned Materials Authorization  

number (RMA #) before you ship the product back. 

Please write the RMA # clearly on the package near the mailing label. 

LED FIVE YEAR LIMITED WARRANTY 

The  manufacturer  warrants  this  LED  light  against  factory  defects  in  material  and  workmanship  for  five  years 
after the date of purchase.  The owner will be responsible for returning to the Service Center any defective 
item(s) with the transportation costs prepaid.  The manufacturer will, without charge, repair or replace 

at its 

option

,  products,  or  part(s),  which  its  inspection  determines  to  be  defective.    Repaired  or  replacement 

item(s) will be returned to the purchaser with transportation costs prepaid from the service point.  A copy of 
the  purchaser's  receipt  must  be  returned  with  the  defective  item(s)  in  order  to  qualify  for  the  warranty 
coverage.    Exclusions  from  this  warranty  include,  but  are  not  limited  to,  domes,  and/or  the  finish.    This 
warranty shall not apply to any light, which has been altered, such that in the manufacturer's judgment, the 
performance or reliability has been affected, or if any damage has resulted from abnormal use or service. 

 

There  are  no  warranties  expressed  or  implied  (including  any  warranty  of  merchantability  or  fitness),  which 
extend this warranty period.  

The loss of use of the product, loss of time, inconvenience, commercial loss or 

consequential damages, including costs of any labor, are not covered

.  The manufacturer reserves the right 

to  change  the  design  of  the  product  without  assuming  any  obligation  to  modify  any  product  previously 
manufactured. 

 

This warranty gives you specific legal rights.  You might also have additional rights that may vary from state to 
state.  Some states do not allow limitations on how long an implied warranty lasts.  Some states do not allow 
the  exclusion  or  limitation  of  incidental  or  consequential  damages.    Therefore,  the  above  limitation(s)  or 
exclusion(s) may not apply to you. 

Содержание Star Phazer









Отзывы: