-1-
Mounting
LDHT364-T-*
These are designed to fit into a standard 4½” mounting hole that is
common to most commercial vehicles.
1. Insert the rubber grommet into the mounting hole.
2. Snap the light into the grommet taking care to ensure the text “TOP”
is located at the top.
LDHT362-T-* or LDHT363-T-*
Assemble bolts, washers, and nuts as shown above.
•
Installer must have firm knowledge of vehicle electrical systems & emergency equipment.
It is the sole responsibility of the installer to ensure the warning light is secure. The
manufacturer assumes no responsibility for the secure mounting of this light.
•
If you need to drill any holes when installing this light, please take care to check that
BOTH SIDES of your drilling surface are clear from obstructions.
•
Choose a mounting location away from any air bag deployment areas.
•
Controls should be placed within convenient reach of the driver.
•
Use only soap and water when cleaning product. Use of other chemicals may discolor
lens and/or housing, diminishing light output. Replace discolored lenses immediately!
Installation Notes
LDHT362
LDHT364
LDHT363
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this
manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Star Headlight &
Lantern Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this manual.
