Star Headlight & Lantern LDHT36 Series Скачать руководство пользователя страница 1

LDHT362-T-*

 

LDHT364-T-*

 

PLIT477  REV. B     2/15/13 

LED FIVE YEAR LIMITED WARRANTY 

The  manufacturer  warrants  this  LED  light  against  factory  defects  in  material  and  workmanship  for  five  years 
after the date of purchase.  The owner will be responsible for returning to the Service Center any defective 
item(s) with the transportation costs prepaid.  The manufacturer will, without charge, repair or replace 

at its 

option

,  products,  or  part(s),  which  its  inspection  determines  to  be  defective.    Repaired  or  replacement 

item(s) will be returned to the purchaser with transportation costs prepaid from the service point.  A copy of 
the  purchaser's  receipt  must  be  returned  with  the  defective  item(s)  in  order  to  qualify  for  the  warranty 
coverage.    Exclusions  from  this  warranty  include,  but  are  not  limited  to,  domes,  and/or  the  finish.    This 
warranty shall not apply to any light, which has been altered, such that in the manufacturer's judgment, the 
performance or reliability has been affected, or if any damage has resulted from abnormal use or service. 

 

There  are  no  warranties  expressed  or  implied  (including  any  warranty  of  merchantability  or  fitness),  which 
extend this warranty period.  

The loss of use of the product, loss of time, inconvenience, commercial loss or 

consequential damages, including costs of any labor, are not covered

.  The manufacturer reserves the right 

to  change  the  design  of  the  product  without  assuming  any  obligation  to  modify  any  product  previously 
manufactured. 

 

This warranty gives you specific legal rights.  You might also have additional rights that may vary from state to 
state.  Some states do not allow limitations on how long an implied warranty lasts.  Some states do not allow 
the  exclusion  or  limitation  of  incidental  or  consequential  damages.    Therefore,  the  above  limitation(s)  or 
exclusion(s) may not apply to you. 

LDHT36 Series 

PAR 36 Hazard/Turn Signal LED Lights

 

• 

These lights are NOT designed to replace the standard Turn Signals or Hazard lights on your vehicle. 

 

• 

These lights, when activated via a user-supplied switch, will flash in a pre-programmed warning pattern 
that is selected at the time of installation. 

 

• 

If these lights are powered up, and a Turn Signal (blinker) is activated, the corresponding light will 
mimic the flashing of the Turn Signal.  The opposite light will either remain in the warning pattern 
mode, deactivate (turn OFF), or become Steady Burn, depending upon initial programming of your 
lights at the time of installation. 

 

• 

These lights are NOT designed to act as STOP or Brake lights.  

LDHT36 Functionality 

Please read all of the following instructions before installing your new light.  

Failure to follow these safety precautions may result in damage to your light or 

vehicle and may result in serious injury or death to you and your passengers. 

LDHT363-T-*

 

Содержание LDHT36 Series

Страница 1: ...or are not covered The manufacturer reserves the right to change the design of the product without assuming any obligation to modify any product previously manufactured This warranty gives you specific legal rights You might also have additional rights that may vary from state to state Some states do not allow limitations on how long an implied warranty lasts Some states do not allow the exclusion...

Страница 2: ... clear from obstructions Choose a mounting location away from any air bag deployment areas Controls should be placed within convenient reach of the driver Use only soap and water when cleaning product Use of other chemicals may discolor lens and or housing diminishing light output Replace discolored lenses immediately Installation Notes LDHT362 LDHT364 LDHT363 NOTICE Due to continuous product impr...

Страница 3: ... seconds it will blink twice after 9 seconds it will blink 3 times and so on Use the chart below to determine the proper length to Hold the Green wire to program the desired mode Opposite Turn Signal Programming Summary Black Ground Red 10 16VDC White 10 16VDC Green To program touch to Ground Release Green After Opposite Light Mode Triple Blink 9 sec Steady Burn Mode Quad 4 Blink 12 sec OFF Quint ...

Страница 4: ...ATTERY AFTER PROGRAMMING Connect to Positively Switched Left Turn Signal Blinker AFTER PROGRAMMING Connect to Positively Switched Right Turn Signal Blinker Phase 1 Flash Pattern Phase 2 Flash Pattern Pattern Type Pattern Description CPS Shortcut 1 17 K Flicker 1 0 Pattern 1 Phase 1 3 sec or 1 flash Pattern 17 Phase 2 9 sec or 3 flashes 2 18 L Fast Doubleflash 3 3 3 19 M Tripleflash 2 5 4 20 N PSU ...

Отзывы: