Star Cooperation 3-01000A01-01, Инструкция по эксплуатации

Страница: 10 / 18

Created by STAR ELECTRONICS GmbH & Co. KG
Date created 2020-11-04 Date modified 2020-11-04 Page 10 of 18
3
7
-0
0
1
-T
0
8
_I
nst
ru
ct
io
n_
fo
r_
U
se
_D
1
V
9
-F
Figure 3: Ethernet connector with yellow and green LED
3.4.3 LEDs and DIP-switches
The FlexMedia 1000BASE-T1 has two additional LEDs at the power connector side: a LED for IEEE(A2)
(yellow) near the DIP switch and a LED for Power status (green) near the Power connector.
IEEE(A2) LED Description
Off The device operates in Legacy (A0) 1000BASE-T1 Mode
On The device operates in Compliant (A2) 1000BASE-T1 Mode
Power LED Description
On The device is powered on
Ethernet
Green LED
(Link)
Yellow LED
(Active)
Description
On Off The link is established, no data exchange occurring
On Blinking Data exchange is in progress
Off Off No link is established, the data exchange is not possible
1000BASE-T1
Green LED
(Link)
Yellow LED
(Active)
Description
On Off The link is established, no data exchange occurring
On Blinking Data exchange is in progress
Blinking Off No link is established, the data exchange is not possible
The DIP-Switch ‘1’ configures the 1000BASE-T1 interface – it changes between Master or Slave function. If
the switch is up the transceiver is configured as Slave, if the switch is down it is configured as Master.
The DIP-Switch ‘2’ configures the bitrate of both ethernet interfaces. If the switch is down, the converter is
configured in 1000MBit/s mode (1GBit/s), if the switch is up it is configured in 100MBit/s mode.
NOTICE
It is not possible to convert between 100MBit/s and 1000MBit/s.
Lin
k
Act
iv
e