15
For example, to find out which code is operating your TV:
5.
To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g.,
AUX, DVD, AUD,
or
SAT
) for the device
you are checking. Write down the codes in the
appropriate boxes on page 13.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control
capabilities are locked to the satellite receiver. The
affected keys
*
are
1
through
0
,
CH+
,
CH-
,
ENTER
, and
LAST
. This guarantees that you do not inadvertently
change a channel on your TV or VCR. However, you can
de-activate this feature to allow full access to these keys
in the
TV
and
VCR
modes.
*
NOTE:
This feature does not affect the
AUDIO
mode.
1.
On the remote control, press and hold
TV
until
it blinks twice.
2.
Enter
9 9 0
. The
TV
key blinks twice.
3.
To view the code for the first digit, press
1
once. Count the number of times the
TV
key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 13.
NOTE:
If a code digit is 0, the selected mode key does
not blink.
4.
Repeat step 3 five more times for the
remaining digits. Use
2
for the second digit,
3
for the third digit,
4
for the fourth digit. and
5
for the fifth digit. Finish writing down the
code in the TV Code boxes on page 13.
Motorola 551 IR_IR-UHF Rev 2.3.fm Page 15 Friday, May 26, 2006 12:27 PM
