RM THREE
Professional performance mixer
OWNER’S M A N U A L
FA D E R C LE A N I N G
The RM THREE faders may need lubrication from time to time. This will extend
the fader life and eliminate any potential damage due to extended heavy usage.
Cleaning Instructions
1. Remove the fader to be cleaned by unscrewing the outer screws (removing
the 2 inner screws will detach the fader from the fader plate) and disconnecting
the cable coming from the mixer.
2. Spray a small amount of cleaner or lubricant into both ends of the fader and
slide the fader back and forth a few times to spread the fluid evenly throughout
the fader.
3. Shake and wipe off excess fluid before re-assembling the fader.
FA D E R R E PL AC E M E N T
To replace the cross or channel faders, follow step 1 of the cleaning instructions.
Replacement parts are available from Stanton or your local Stanton dealer.
LF-RM3
Channel input fader
CF-RM3
Crossfader
PS-18US
US Power Supply (110v)
PS-18EU
European Power Supply (220v)
PS-18UK
UK only Power Supply (240v)
©
1999
, Stanton Magnetics, LLC
