TE C H N I C A L S P E C I FI C AT I O N S
Line inputs:
8
(RCA),
150
mV /
27
K ohm
Phono inputs:
4
(RCA),
3
mV /
47
K ohm
DJ mic input:
3
(XLR, 1/4“),
2.45
mV /
3
K ohm
Master output:
1
(RCA),
1.2
V /
1K
ohm
Record output:
1
(RCA),
245
mV /
10
K ohm
Headphone output:
1
(1/4”),
32
-
200
ohms recommended
Frequency Response:
20
Hz -
20
kHz, +/-
2
dB
Tone Control :
+
9/-26
dB (Hi, Mid, Low)
Mic Tone:
Hi/Mid/Lo
+/-10
dB
Gain Control:
0-20dB
S/N Ratio:
Less than 70dB
T.H.D:
less than
0.2%
Dimension(LxWxD):
1
9
” x
8.75”
x
4” (482 x 222
x
102
mm)
WA R R A N T Y
This unit has been designed and manufactured using quality
components. Therefore, it is warranted to be free from defects in materi-
als (limited as specified below), and workmanship for a period of twelve
(12) months from the original purchase date. During this period, all
service and parts necessary to repair a defect will be free of charge. This
limited warranty applies to mechanical parts which are subject to wear
and tear as specified:
• Faders, specified durability: 15,000 cycles
• Rotary potentiometers, specified durability: 10,000 cycles
• Switches, specified durability: 10,000 cycles
Consequently, the parts listed above are warranted to be free from
defects in materials and workmanship for a period of thirty days (30)
days from the original purchase date.
FOR THE WA R R A N TY TO BE VA LID, PLEASE CO M PLE TE THE
O N LINE WA R R A N TY REGIST R ATION FORM FOUND AT
W W W. STA N TO N M AG N E TI CS . CO M
Stanton Magnetics, LLC,
Hollywood, FL 33020
27. Fader Start connector: Connects to the sound module’s remote start output (such as
Stanton’s S-Series CD players) to control the cue-start via the mixer’s crossfader.
28. Audio signal outputs: Master output connects to an amplifier, EQ, crossover, or other
outboard signal processing. Record out connects to tape recorder, mini disk recorder,
etc. Booth output is a second master output used mostly for in-booth monitoring.
29. AC cord connector: Input connection for the supplied removable AC cord.
