Description of Functions
6.
Headphone outputs:
Connect up to two pairs of stereo
headphones using 1/4-inch and 1/8-inch jacks.
7.
Cue Pan slider:
This adjusts the relative headphone balance
between the Cue mix (PFL) and Master output (PGM).
8.
Fader Start switch:
Lets you automatically start a CD player from
the cue point by moving the crossfader (requires a compatible CD
player like the Stanton S-Series).
9.
Crossfader:
Creates a gradual fade between two channels, as
determined by the Crossfader Source selectors (14). Essential for
scratching and smooth house mixing.
10.
Master fader:
Adjusts the overall level of the Master output
signal.
11.
Master Stereo/Mono toggle switch:
Selects whether the Master
output will be stereo or summed to mono.
12.
PFL switch:
Push this to assign the channel to the Cue mix in
headphones. (Pop quiz: Do you know what “PFL” stands for?
Answer: “Pre-Fader Level.” In other words, the Channel fader
does not affect the level you hear in the headphone cue mix.)
13.
Channel fader:
Controls the input channel level.
14.
Crossfader Source selectors:
These select whether the input
channel is assigned to the left side (A) or right side (B) of the
crossfader. Select “BYPASS” if you don’t want the channel
assigned to the crossfader at all.
15.
Input Gain knobs:
Use these to adjust the level of inputs. For
optimum signal-to-noise, raise the knob until the “max” LED
lights occasionally (usually around the 2 o’clock position).
