Stanley SXPW7032BS Скачать руководство пользователя страница 8

8

9

SPECIFIC SAFETY INSTRUCTIONS

Warning! 

Do not use the pressure washer in areas 

where there is a risk of explosion or fire from combustible 

materials.  The sparks possibly caused when using this 

pressure washer may ignite combustible materials as well 

as flammable liquids, paint, varnish, petrol, flammable 

gases and dust of an explosive nature.  As a precaution it is 

recommended that you consult an expert on a suitable fire 

extinguisher and its use. Ensure that the work area is kept 

clear of combustible materials.

Warning!

 Do not use the pressure washer indoors or in 

confined spaces where exhaust gases, smoke or fumes 

could reach dangerous concentrations.
•  Fully assemble pressure washer before use
•  Always use the pressure washer in an open well  

ventilated area.

•  Ensure pressure washer is fully assembled before use.
•  Unit will become hot during use.  Please keep pressure 

washer at least one metre (1m) away from buildings, 

other equipment, pedestrian areas or flammable 

materials.

•  Never pull the re-coil starter once the pressure washer 

engine has started.  Any damage caused will not be 

covered by warranty.

•  Ensure the pressure washer has stopped before 

servicing, or lubricating etc.

•  Do not attempt to modify the pressure washer, guards 

or the supplied accessories in any way.

•  Do not touch the exhaust.  This can become very hot 

during operation and can cause serious burns.

•  Do not allow high pressure hose to touch the muffler. 

Damage will occur and will not be covered by warranty.

•  Always check the pressure washer for damaged parts or 

fuel leaks, ensure these are fixed before using it.

•  Never refuel while smoking or in the vicinity of  

an open flame.

•  Always wear safety eye wear, ear and breathing 

protection when operating or refuelling the pressure 

washer.

•  To avoid a fire if you spill fuel while refuelling, clean up 

before starting the pressure washer.

•  Never operate or store the pressure washer on its side, 

ALWAYS operate or store in an upright manner on firm,  

solid ground.

•  Ensure that the pressure washer has stopped and 

turned off when not in use, before servicing, lubricating, 

making changes and when changing attachments such 

as air hoses / tools.

•  Do not attempt to modify the pressure washer, guards 

or the supplied accessories in any way.

•  Your pressure washer is factory set, NEVER attempt to 

speed it up as this could endanger the user and damage 

the pressure washer and/or attached appliances.

•  If the pressure washer makes an unfamiliar sound or 

vibrates excessively, switch the pressure washer ‘OFF’ 

immediately. Investigate the possible cause or consult 

your authorised service agent.

•  Never use coolant in the pressure washer as damage 

may occur.

•  Never transport the pressure washer with fuel in the 

tank.  ALWAYS empty the fuel tank.

•  Do not tamper or alter any parts as this may cause 

personal injury or damage the pressure washer.

•  Never point gun/lance at people or animals.
•  Never hose or wet people or animals.
•  Never spray the pressure cleaner. 
•  Never spray electrical connections, electrical outlets or 

electrical appliances/fixtures.

•  Never operate the pressure washer without water, any 

damage caused will not be covered by warranty. 

•  Never use hot water.
•  Maximum water temperature is 35ºC. 
•  Only use cold water with this pressure washer. 
•  Bystanders or people watching must be at least 10m 

away from the operating pressure washer. 

•  Only use clean water with this pressure washer. 
•  Never pump acids, alkaline, solvents or flammable 

liquids through this pressure washer, any damage 

caused will not be covered under warranty.

•  Never allow the high pressure hose to touch the muffler 

or motor, as these hot surfaces will damage the hose.  

Damage caused will not be covered under warranty.

•  Do not keep motor running if not using the wand.  

Damaged caused will not be covered under warranty.

•  Inlet water hose size must be at least 12mm diameter. 
•  Inlet flow rate must be at least 18 L/min and mains 

pressure.

•  Damage may occur if pressure washer nozzle is held too 

close to the cleaning surface. Damage caused will not 

be covered under warranty.

•  Always trial the pressure washer and selected nozzle  

on an inconspicuous part of the appliance or surface  

to be cleaned.

Содержание SXPW7032BS

























Отзывы: