Stanley SXPW4061 Скачать руководство пользователя страница 18

18

19

MAINTENANCE INFORMATION

If scheduled maintenance is NOT carried out then this 

will void your warranty.  Use the Service Log on page 22 

to keep track of the regular servicing.  Ensure that the 

authorised service agent has dated, signed and stamped 

this log to ensure your warranty is not void.

Fuel Tank Filter (PIC. 20)

The fuel tank filter should be checked every time you fill up 

the fuel tank.  If dirty, replace. Your fuel tank filter should 

be replaced every 50 hours (operation) or every 3 months, 

which ever occurs first or whenever considered necessary.
To check or replace the fuel tank filter;

1.  Remove the fuel tank cap.
2.  Remove the fuel tank filter.
3.  If dirty replace fuel tank filter before using the pressure 

washer.

4.  Push new fuel tank filter into the top of the fuel tank.
5.  Replace the fuel tank cap.

Spark Plug (PIC. 21)

Spark plug should be checked every 50 hours (operation) or 

every 3 months and replaced every 100 hours (operation) 

or every 6 months, which ever occurs first or whenever 

considered necessary. 

1.  Unplug the spark plug lead off the spark plug.
2.  To clean use a wire brush/nail file and remove the 

carbon deposits on spark plug base.

3.  Check the spark plug gap using a feeler gauge. The gap 

should be 0.7mm 

 0.8mm (0.028” 

 0.031”).

4.  The replacement spark plug is TORCH F6RTC or NGK 

BPR6ES. 

Fuel tank filter under 

fuel tank cap

Spark plug lead

PIC. 21

PIC. 20

Air Filter

Air filter should be check daily and cleaned or replaced 

every 25 hours of operation or every 3 months whichever 

occurs first or whenever considered necessary.
To check or replace the air filter;

1.  Remove the air filter cover, Pic. 22, by pushing in the 2 

lugs and gently pulling forward and towards the back 

to unclip the rear to clips.

2.  If dirty you can clean the foam filter or just replace it.
3.  Using a clean soft cloth wipe all dust and debris from 

the air filter box and air filter cover.

4.  Replace the foam filter.
5.  Clip the back side of the air filter cover into place and 

rotate forward to push the 2 front grooves over the 2 

front lugs.

PIC. 22

Air filter cover

Содержание SXPW4061

























Отзывы: