6
7
II
M
M N
N
M
M A
A X
X
II
M
M N
N
M
M A
A X
X
II
M
M N
N
M
M A
A X
X
UNPACKING & ASSEMBLY
Assembly
NOTE: This STANLEY patio cleaner only connects to the
STANLEY electric pressure washer range.
1 Screw the bottom wand to the patio cleaner head.
2 If using patio cleaner with SXEW145001 or
SXEW159501 go to step 4.
3 If using a larger STANLEY pressure washer push and
click the the extension tube to the bottom tube and
secure with the over screw nut (fitted to bottom tube).
4 Remove the lance and or nozzle from the gun and
trigger.
5 Connect the patio cleaner head and tube assembly to
the gun and trigger.
You can adjust the amount of pressure the patio cleaner
provides by adjusting the pressure control knob. High
pressure can damage surfaces especially soft or
damaged surfaces like timber or flaking paint. It is highly
recommended to test the patio cleaner pressure on an
inconspicuous small area before attempting to clean the
complete area.
1 Low pressure cleaning - rotate control to anti-
clockwise, ideal for timber.
2 Full pressure cleaning - rotate control to clockwise,
ideal for concrete.
How to Use
1 Ensure the patio cleaner is fully assembled and securely
connected to the gun and trigger.
2 Ensure the electric pressure washer is connected to
water and mains power as per its user manual.
3 Use a firm grip on the gun and trigger. Squeeze the
trigger and move the patio cleaner in a gentle left and
right motion over the area to be cleaned.
4 To stop release the trigger.
5. When finished clean the patio cleaner and store away.
6 Clean and store electric pressure washer as per its user
manual.
Cleaning Nozzles (Pic 4)
To clean the patio cleaner nozzles ensure patio cleaner is
not connected to the pressure washer.
1 Turn the patio cleaner upside down
2 Locate and remove the “U” pin
3 Pull out the nozzle and clean with the cleaning tool.
4 Refit nozzle and secure with the “U” pin.
PIC. 2
PIC. 3
PIC. 4
TROUBLE
SHOOTING
FULL PRESSURE < > LOW PRESSURE
NO PRESSURE - POSSIBLE CAUSE
SUGGESTED FIX
Adjustable pressure control turned down
Blocked nozzles
Turn up pressure control knob clockwise to increase pressure
Remove and clean nozzles as mentioned above Pic.4.
II
M
M N
N
M
M A
A X
X
