Stanley STHT77498-1, Оригинальное руководство пользователя

Страница: 7 / 20

English
5
WARNING: Read and understand all instructions.
Failure to follow the warnings and instructions in this
manual may result in serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING: Laser Radiation Exposure. Do not
disassemble or modify the laser level. There are
no user serviceable parts inside. Serious eye injury
could result.
WARNING: Hazardous Radiation. Use of controls
or adjustments, or performance of procedures, other
than those specified herein may result in hazardous
radiation exposure.
The label on your laser may include the following symbols.
symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust.
This tool may create sparks which may ignite the dust
or fumes.
User Safety
Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
If you have any questions or comments about this or any
STANLEY® tool, go to
http://www.sTAnlEY.com .
Laser Information
The STHT77498-1 and STHT77499-1 lasers are Class 2 laser
products. The lasers are self-leveling laser tools that can be used
for horizontal (level) and vertical (plumb) alignment projects.
SELF-LEVELING 360º CROSS-LINE LASER
STHT77498-1, STHT77499-1
• Store an idle laser out of reach of children and other
untrained persons
. Lasers are dangerous in the hands of
untrained users.
• Tool service MUST be performed by qualified repair
personnel.
Service or maintenance performed by unqualified
personnel may result in injury. To locate your nearest Stanley
service center go to
http://www.2helpU.com .
• Do not use optical tools such as a telescope or transit to
view the laser beam.
Serious eye injury could result.
• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into the
laser beam.
Serious eye injury could result.
• Do not position the laser near a reflective surface which
may reflect the laser beam toward anyone’s eyes.
Serious
eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow
children to operate the laser.
Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If the laser
falls, damage to the laser or serious injury could result.
Personal Safety
• Stay alert, watch what you are doing, and use common sense
when operating the laser. Do not use the laser when you are
tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating the laser may result in
serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, non-skid
safety shoes, hard hat, and hearing protection will reduce
personal injury.
Tool Use and Care
• Do not use the laser if the
Power/Transport lock
switch
does not turn the laser on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric shock
or injury.