Stanley ST1.5WP-(CA), Инструкция по эксплуатации

Страница: 17 / 32

Pre-Operating Instructions: Air Cleaner Element Check
NOTICE:
•­­Do­NOT­run­engine­without­water­inside­the­pump.­Operation­of­engine­without­water­inside­the­
pump will cause the pump to overheat. Prolonged operation of engine without water inside the pump
will damage the pump gasket and impeller.
•­­If­water­within­the­pump­is­not­full,­shut­off­the­engine­at­once­and­fill­the­pump­after­allowing­the­
unit to cool.
To Check Pump Water:
1. Remove water filler cap.
2.­­Visually­check­for­water­inside­pump.
3. If too low, add water through water filler hole.
4. Securely re-fasten water filler cap.
PRIME PUMP BEFORE USE!
15