Stanley SRR1200, Оригинальное руководство пользователя

Страница: 10 / 40

10
ENGLISH
(Original instructions)
Helpful Hints
• When working on outside edges, move the tool
counterclockwise (Fig. M). When working on inside
edges, move the tool clockwise.
• Use HSS router bits for softwood.
• Use TCT router bits for hardwood.
• You can use the tool without a guide (Fig. O). This is
useful for signwritting and creative work. Only make
shallow cuts.
• Refer to the table below for common types of router bits.
MAINTENANCE
Your Stanley tool has been designed to operate over a long
period of time with a minimum of maintenance. continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
WARNING! To minimize the danger of serious personal
injury, please switch off the tool power and disconnect
all plugs before adjusting or removing/ installing any
accessory.
Before reassembling the tool, press and release
the trigger switch to make sure the tool is already switched
off.
WARNING! Before performing any maintenance on corded/
cordless power tools:
Lubrication
Stanley tools are properly lubricated at the factory and are
ready for use.
Tools should be lubricated regularly every year depending on
usage. (Tools used on heavy duty jobs and tools exposed to
heat may require more frequent lubrication.) This lubrication
should be attempted only by trained power tool
repairperson’s such as those at Stanley service centers or in
other qualified service personnel.
Cleaning
WARNING!
Regularly clean the ventilation slots
in your tool using a soft brush or dry cloth.
WARNING!
Never use solvents or harsh
chemicals to clean non-metal parts of the tool.
These chemicals may weaken the material of the
parts. Use only mild soap and damp cloth to
clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into
liquid.
IMPORTANT!
To ensure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this
manual) should be performed by authorized
service centers or other qualified organizations,
always using identical replacement parts. Unit
contains no user service able parts inside.
Optional Accessories
WARNING!
Since accessories, other than those
offered by Stanley, have not been tested with this
product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
Stanley, recommended accessories should be used with this
product.
The performance of any power tool is dependent upon the
accessory used. Stanley accessories are engineered to high
quality standards and are designed to enhance the
performance of power tool. By using Stanley accessories will
ensure that you get the very best from your Stanley tool.
Stanley offers a large selection of accessories available at
our local dealer or authorized service center at extra cost.
Remarks
Stanley’s policy is one of continuous improvement to our
products and, as such, we reserve the right to change
product specifications without prior notice. Standard
equipment and accessories may vary by country. Product
specifications may differ by country. Complete product range
may not be available in all countries. Contact your local
Stanley dealers for range availability.
Router bits (Optional) (FIG. P)
Description Application
Straight bit (1)
Grooves and rebates
T
rimming bit (2)
Trimming laminates or
hardwood; accurate
profiling using a template
Rebating bit (3)
Rebates on straight or
curved workpieces
V
-grooving bit (4)
Grooves, engraving and
decorative edge moulding
Core box bit (5)
Fluting, engraving and
decorative edge moulding
Core bit (6)
Decorative edge moulding
Ogee moulding bit (7)
Decorative edge moulding
Rounding over bit (8) Rounding over edges
Dovetail bit (9)
Dovetail joints
Chamfer bit (10) Chamfer edges