13
CARE AND MAINTENANCE
Storage
• When your pressure washing session has been
completed, turn off the power switch located on
the front of the power washer. Unplug the power
cord from the outlet. Turn off the water supply. Pull
the trigger on the spray gun 2-3 times to drain out
the excess water and to release any remaining water
pressure. Disconnect the garden hose adapter from
the water inlet.
DO NOT
allow the power washer to
run with no water flowing through it.
• Remove detergent bottle and clean completely.
Residual chemical will stick to the container and
can cause the detergent injector to clog and not
function properly.
• Remove high pressure hose from spray gun.
•
Remove lance from the gun. Place the gun in the
holder on the side. Lances are placed into any of the
slots in the back of the unit. Make sure to discard
any remaining detergent from the bottle. Flush the
bottle and nozzle head with fresh water to prevent
clogging.
• Hook the power cord around the cord hook on the
right side of the machine when facing it.
93902_16ARN027_1600_ENG-FR-SP.indd 13
16/12/14 下午5:46
