Stanley SCSS-700VS, Руководство по установке и эксплуатации

Страница: 71 / 74

Manufacturer Warranties and Limitation of Liability
Manufacturer Warranties. Subject to the limitations set forth herein,
Manufacturer warrants that the Products manufactured by it in its
Northford, Connecticut facility and sold by it to its authorized Distributors
shall be free, under normal use and service, from defects in material and
workmanship for a period of thirty six months (36) months from the date of
manufacture (effective Jan. 1, 2009). The Products manufactured and
sold by Manufacturer are date stamped at the time of production.
Manufacturer does not warrant Products that are not manufactured by it in
its Northford, Connecticut facility but assigns to its Distributor, to the
extent possible, any warranty offered by the manufacturer of such
product. This warranty shall be void if a Product is altered, serviced or
repaired by anyone other than Manufacturer or its authorized Distributors.
This warranty shall also be void if there is a failure to maintain the
Products and the systems in which they operate in proper working
conditions.
MANUFACTURER MAKES NO FURTHER WARRANTIES, AND
DISCLAIMS ANY AND ALL OTHER WARRANTIES, EITHER
EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS,
TRADEMARKS, PROGRAMS AND SERVICES RENDERED BY
MANUFACTURER INCLUDING WITHOUT LIMITATION,
INFRINGEMENT, TITLE, MERCHANTABILITY, OR FITNESS FOR ANY
PARTICULAR PURPOSE. MANUFACTURER SHALL NOT BE LIABLE
FOR ANY PERSONAL INJURY OR DEATH WHICH MAY ARISE IN THE
COURSE OF, OR AS A RESULT OF, PERSONAL, COMMERCIAL OR
INDUSTRIAL USES OF ITS PRODUCTS.
This document constitutes the only warranty made by Manufacturer with
respect to its products and replaces all previous warranties and is the only
warranty made by Manufacturer. No increase or alteration, written or
verbal, of the obligation of this warranty is authorized. Manufacturer does
not represent that its products will prevent any loss by fire or otherwise.
Warranty Claims. Manufacturer shall replace or repair, at Manufacturer's
discretion, each part returned by its authorized Distributor and
acknowledged by Manufacturer to be defective, provided that such part
shall have been returned to Manufacturer with all charges prepaid and the
authorized Distributor has completed Manufacturer's Return Material
Authorization form. The replacement part shall come from Manufacturer's
stock and may be new or refurbished. THE FOREGOING IS
DISTRIBUTOR'S SOLE AND EXCLUSIVE REMEDY IN THE EVENT OF
A WARRANTY CLAIM.
Warn-HL-08-2009.fm