Stanley SCSS-700VS, Руководство по установке и эксплуатации

Страница: 20 / 74

VIP-Series Voice Integration Package Installation/Operation Manual
3-4 53796
3.4.2 Surface Mounting
The cabinet can be mounted on the wall surface by using the mounting holes in the back of the
cabinet (see Figure 3-2).
1. Insert two screws level with each other, 14" apart for the top cabinet key shaped holes. See
Figure 3-2.
2. Hang the cabinet onto the two screws. Tighten the screws down.
3. Insert two screws into the two bottom mounting holes and tighten them snug to the
cabinet.
If you need to remove the cabinet door and the dead front panel, see Section 3.4.3.1 for
instructions.
Figure 3-2 Cabinet Mounting Holes
Key Shaped Holes
Bottom Mounting Holes
20"
26-1/2”