Stanley SCSS-700, Руководство по установке и эксплуатации

Страница: 179 / 258

Programming
53722 9-31
9.6.4 Holiday Days
Up to 18 dates can be designated as holidays. When day/night sensitivity is enabled, all
photoelectric smoke detectors in the system will use night sensitivity for the entire day on
days designated as holidays (see Section 9.6.4).
To add or change a holiday, follow these steps.
1. Enter the installer code.The panel will automatically go to the main menu.
2. Select for Panel Programming.
Display reads:
Initializing
Please wait . . .
3. Select for System Options.
4. Select for Holiday Days. A screen similar to that shown in Figure 9-10 will display.
5. Edit the holiday schedules you wish to change or add holidays as needed in the program-
mable holiday locations.
Figure 9-10 Edit Holidays Screen
6. Enter the month of the Holiday, then press .
7. Enter the day of the month for the Holiday, then press .
8. Repeat steps 6 and 7 for any remaining holidays you wish to program.
9.6.5 Miscellaneous Options 1
Through this programming option you can set the water flow delay time, low AC report delay,
enable or disable automatic daylight savings time adjustment, clock format, and AC clock
frequency.