Stanley SB25PT-05, Инструкция по эксплуатации

Страница: 7 / 112

O R I G I N A L I N S T R U C T I O N
8
• Keep tool handles dry, clean, and free from oil and grease.
• Never leave operating tool unattended and disconnect battery when tool is not in use.
• Keep hands away from trigger before connecting to power source and/or battery pack, picking up or
carrying the tool.
• DO NOT operate a tool that is directed towards any person(s).
• DO NOT operate tool with the nose housing removed.
• Keep dirt and foreign matter out of the air vents of the tool as this will cause the tool to malfunction.
1.2 LABELS AND ICONS
MARKINGS ON TOOL
SERIAL NUMBER POSITION:
The Serial Number is located on the foot of the tool (Fig m). This serial
number can only be viewed once the battery (g) is removed from the tool.
DATE CODE POSITION: The date code (n), which also includes year of manufacture is printed into the
serial number label: MM2020xxx
LABELS ON TOOL, CHARGER AND BATTERY PACK
In addition to the pictographs used in this manual, the labels on the tool, charger and the battery pack
may show the following pictographs.
Read all documentation Do not charge damaged battery packs
Read all documentation Do not expose to water.
Wear eye protection
Have defective cords replaced
immediately
Wear respiratory protection Charge only between 4 °C and 40 °C.
Wear hearing protection
Discard the battery pack with due care
for the enviroment.
Battery charging. Do not incinerate the battery pack.
Battery charged. Charges Li-Ion battery packs.
Hot/cold pack delay.
See technical Data for charging time.
Problem pack or charger.
Only for indoor use.
Problem power line
Shock hazard symbol
Do not probe with conductive objects
Charge DEWALT battery packs only
with designated DEWALT chargers.
Charging battery packs other than the
designated DEWALT batteries with a
DEWALT charger may make them burst
or lead to other dangerous situations.
Visible radiation. Do not stare into
light.