14 ► PBD
1201 User Manual
Problem
Solution
The tool won’t crimp when I press the trigger.
Ensure the battery is charged. Disengage the trigger
lock.
The InteLED flashes yellow when I activate the tool.
The maintenance interval is about to elapse. Have the
tool serviced as soon as possible.
The tool repeatedly give me bad crimps / The InteLED
flashes red after every crimp.
Ensure the battery is fully charged. Ensure the dies
are inserted properly into the crimping head. If problem
persists, have the tool serviced as soon as possible.
The tool is leaking hydraulic oil.
Have the tool serviced immediately.
The tool is not saving data or will not connect to
STANLEY Crimp software.
Have the tool serviced as soon as possible.
TROUBLESHOOTING
