Stanley IW12, Руководство пользователя

Страница: 7 / 12

IW12 User Manual | 7
What is the IW12 Hydraulic Impact Wrench?
IW12 is a medium duty impact wrench designed for bolting, drilling and
underwater applications. IW12 requires an external hydraulic power supply
capable of supplying 4-12 GPM (15-45 LPM) @ 1000-2000 PSI (70-140 BAR).
Specifications
Pressure 1000-2000 PSI (70-140 BAR)
Flow 4-12 GPM (15-45 LPM)
Hydraulic Circuit Type Open Center
Max. Relief Pressure 2100 PSI (145 BAR)
Recommended Back
Pressure 250 PSI (17 BAR) - Can be used with higher
back pressures with reduced seal life.
Couplers 3/8 inch NPT Flush Face
Port Size -8 SAE O-ring
Min. Hose Pressure Rating 2500 PSI (172 BAR)
Max. Hydraulic Oil
Temperature
140°F (60°C)
HTMA/EHTMA Category Type II, Category D
Drive 3/4 inch Square Drive
RPM 1385 @ 5 GPM (19 LPM)
Torque 250-1200 ft. lbs. (360-1632 Nm)
Tool Weight 21 lbs.
Tool Size 9.5 inches x 4 inches x 14 inches
Underwater Tool Max.
Depth
1000 feet (305 M)
Recommended Hose Diameters for Underwater Applications
Depth
8 GPM (30 LPM) 12 GPM (45 LPM)
100 feet (31 Meters) 5/8 inches (16 mm) 5/8 inches (16 mm)
300 feet (91 Meters) 3/4 inches (19 mm) 1 inch (25.4 mm)
600 feet (183 Meters) 1 inch (25.4 mm) 1 inch (25.4 mm)
1000 feet (305 Meters) 1 inch (25.4 mm) 1 1/4 inches (32 mm)
Sound & Vibration Declaration
Measured A-Weighted sound power
level
102.4 dBA
Measured A-Weighted Sound Pressure 94.4 dBA
Uncertainty, Kpa, in decibels 3.39 dBA
Values determined according to noise test code given in ISO 15744, 11203
and 3744.
Declared vibration emission value in accordance with EN ISO 28927-2.
Declared Vibration Emission Value
(Main Handle):
10.9 m/sec²
Declared Vibration Emission Value
(Support Handle):
11.3 m/sec²
Uncertainty 2.15 m/sec²
Parts of an IW12 - Detail A
1 Anvil
2 Impact Mechanism
3 Year of Manufacture
4 Tool Name Tag
5 Rotation Direction Decal
6 Serial Number
7 Rotation Direction Lever
8 Handle
9 Female Coupler
10 Male Coupler
11 Trigger
12 Trigger Guard - Model IW1234001
13 “Read the Manual” Decal
14 Circuit Type “D” Decal
15 CE Decal - Models IW1214001,
IW12140AX & IW1234001
16 Sound Power Decal
Tool Setup - Detail C
Do not install or change tool accessories while the
hydraulic power source is connected. Accidental
engagement of the tool can cause serious injury.
Disconnect the hydraulic power source before installing
or changing accessories.
1. Disconnect the tool from the hydraulic power source.
Select Rotation Direction
2. Turn the rotation direction lever in the upward position for clockwise
rotation -OR- turn the lever in the downward position for counter
clockwise rotation.
Install Socket
Use only impact-rated sockets and accessories. Do not
use standard sockets or accessories, or sockets that are
in poor condition. These can crack or fracture during
operation and can become a projectile.
3. Push a 3/4 inch, square drive, impact rated socket onto the anvil.
Note: Choose sockets designed for high impact (800-5500 ft. lbs. (1085-
7457 Nm)).
Tool Operation - Detail E
Prevent unintentional starting. Ensure the trigger is in
the off position before connecting to power source,
picking up or carrying the tool. Carrying power tools
with your finger on the trigger or energizing power
tools that have the trigger on invites accidents.
Connect to a Hydraulic Power Source
1. Using a calibrated flow and pressure gauge, check the output of the
hydraulic power source. Ensure it matches the flow and pressure in
“Specifications” on page 7. Hydraulic fluid must be 50°F or above.
Preheat if necessary.
2. Ensure that the hydraulic power source is equipped with a relief valve
set to open at the maximum relief pressure. See “Specifications” on
page 7.
3. Wipe hose couplers with a clean, lint free cloth.
4. Connect the return hose to the tool port marked “Out”.
5. Connect the pressure hose to the tool port marked “In”.
6. Ensure couplers are undamaged, properly connected and are tight.
7. Power up the hydraulic power source.