7
6
•
Make sure the mounting bracket is mounted on a flat, level and stable ceiling or wall surface, assuring that all screws are tightened
securely and observing all cautions and recommendations regarding mounting found in this manual.
•
Only use the screws and wall anchors provided with this unit.
OPERATION
1. Once you have installed the batteries, mounted the unit and connected the AC adapter as described in the previous sections, plug
it into a functioning AC outlet. The AC power LED indicator inside the motion sensor will light red to indicate the unit is properly
connected and ready to use.
2. Park your vehicle(s) in the desired position(s). Adjust each laser beam to point to a prominent spot on the front of each car, preferably
on the dashboard or in the space between the hood and the windshield. Make sure the spot is visible to the driver when parking.
3. The motion sensor will automatically turn on when either of vehicle pulls into the garage. Drive your vehicle until the laser beam
aligns to the predetermined spot on your vehicle, indicating it is parked in the correct position. Both laser beams will automatically
turn off after 15 seconds if no motion is detected from the motion sensor.
TROUBLESHOOTING
The dual laser beams do not light, even when the motion sensor is triggered
1. Check the connection to the DC power port and to the AC power source. Confirm there is a functioning AC current (the AC Power LED
Indicator inside the motion sensor will light red).
2. Check that the three AA alkaline batteries have been installed properly. Check that they are not completely discharged. If discharged,
replace the batteries following the directions given in this instruction manual.
3. If the laser beams do not light after the AC adapter is properly connected into a functional AC outlet or after checking and, if
necessary, replacing the backup batteries, contact manufacturer at (877) 571-2391.
The dual laser beams stay on permanently and seem to never turn off
1. The laser beams may appear to stay on because the motion sensor continuously detects motion, such as the opening or closing
of a door or window, or movement of an animal or person. Make sure the environment surrounding the motion sensor is stationary.
Adjust the unit’s mounting location until the laser beams turn off after 15 seconds when no further motion is detected under the
motion sensor.
2. If the laser beams still remains lit after you have assured there is no motion under the motion sensor, contact manufacturer at
(877) 571-2391.
CARE AND MAINTENANCE
Never submerge the unit in liquids of any kind. If the unit gets dirty, gently clean the outer surfaces of the closed body casing with a soft
cloth moistened with a mild solution of water and detergent.
Except for the batteries, there are no user-serviceable parts inside. Contact the manufacturer if any components have become worn or
broken.
Safe Battery Disposal
Refer to the Safety Warnings in the front of this instruction manual when selecting and replacing batteries. Always dispose of used
batteries properly.
WARNING: TO REDUCE THE RISK OF INJURY/EXPLOSION:
•
Do not dispose of batteries in fire as this may result in an explosion.
•
Do not expose the unit containing batteries to fire or intense heat as it may explode.
ACCESSORIES
Recommended accessories for use with your tool are available from the manufacturer. If you need assistance regarding accessories, please
contact the manufacturer at (877) 571-2391.
WARNING:
The use of any accessory not recommended for use with this appliance could be hazardous.
SERVICE INFORMATION
Whether you need technical advice, repair, or genuine factory replacement parts, contact the manufacturer at (877) 571-2391.
ONE-YEAR LIMITED WARRANTY
The manufacturer warrants this product against defects in materials and workmanship for a period of ONE (1) YEAR from the date of
retail purchase by the original end-user purchaser (“Warranty Period”).
If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the
following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer’s option. Proof of purchase may
be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the
store is a participating retailer). Returns to retailer should be made within the time period of the retailer’s return policy for exchanges
only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy
regarding returns that are beyond the time set for exchanges.
This warranty does not apply to accessories, bulbs fuses and batteries, defects resulting from normal wear and tear, accidents, damages
sustained during shipping, alterations, unauthorized use or repair, neglect, misuse, abuse, and failure to follow instructions for care and
maintenance for the product.
This warranty gives you, the original retail purchaser, specific legal rights and you may have other rights which vary from state to state or
province to province. This product is not intended for commercial use.
Please complete the Product Registration Card and return within 30 days from purchase of the product to: Baccus Global LLC, One City
Centre, 1 North Federal Highway, Suite 200, Boca Raton, FL 33432.
Baccus Global LLC, toll-free number: 1-877-571-2391.
SPECIFICATIONS
Garage Laser Parking Assist
Power supply:
7.5V DC, 1.1A or 3 1.5V AA alkaline batteries (not included)
Laser beam color:
Red
AC Adapter:
Input:
120V AC, 60Hz, 11W
Output:
7.5V DC, 1.1A
Imported by Baccus Global LLC, One City Centre, 1 North Federal Highway, Suite 200, Boca Raton, FL 33432
www.Baccusglobal.com • 1-877-571-2391
RD051616
GLPS_ManualEN_051616.indd 6-7
5/16/2016 10:47:24 AM
