YOUR TEXT HERE
YOUR TEXT HERE
YOUR TEXT HERE
Verify the bed is centered on the screen.
NOTE:
Do not stand in front
of sensor when bed is being detected
.
Verify the bed is recognized
(bed appears with a yellow frame).
*This can take a couple of minutes.
Tap
Done
.
Select a room.
Tap
Select
.
Congratulations Setup complete.
Tap
Finished
.
FORSITE MOBILE DEPTH SENSOR SET-UP SMART GUIDE PG. 2
6
5
4
Tap the
Foresite logo
.
Are you moving the Foresite Mobile
Depth Sensor? Tap
Yes
.
Unplug
the unit.
The unit retains power for 15-30 minutes
after unplugging. An Alarm sounds when
battery is near depletion.
Tap
Done
.
Wrap the power cord behind
the unit and secure.
Tap
Done
.
Lower the pole.
Tap
Done
.
Roll Unit to another room,tap
the
Bed Exit Mode
to begin
monitoring in another room.
Tap Shut Down
when
storing the unit.
!
Press the reset button for
four (4) seconds to power down
the unit or reboot.
Press the reset button for
one (1) second to power
on the unit.
Verify the pole is lowered to
safely pass through doors.
MOVING THE UNIT
3
5
4
PO
WER
Resetting or Powering Down
2
1
© STANLEY Healthcare 2021
Secure unit by locking Adjustable Wheels.
Unlock wheels
Use the Adustable Pole Knob to loosen
the pole in order to lower. Tighten the knob
after lowering the pole height.
