background image

9

ENGLISH

(Original instructions)

Troubleshooting

Problem

Possible cause

Possible solution

Unit will not start.

Battery pack not 
installed properly.

Battery pack 
not charged.

Check battery pack 
 installation.

Check battery pack charg-
ing requirements

Unit starts immedi-
ately upon inserting 
battery

The switch has been 
left in the “on” posi-
tion.

The switch must  be 
moved to “off” to prevent 
the tool from immediately 
starting when battery is in-
serted.

Battery pack will 
not charge.

Battery pack not 
inserted into charger. 

Charger not plugged  
in.

Surrounding air 
temperature too hot or 
too cold.

Insert battery pack into 
charger until LED lights. 

Plug charger into a work-
ing outlet. 

Move charger and battery 
pack to a surrounding air 
temperature of above 40 
degrees F (45ºC) or below 
105 degrees F (+40.5ºC)

Unit shuts off 
abruptly.

Battery pack has 
reached its maximum 
thermal limit.

Out of charge. (To 
maximize the life of 
the battery pack it is 
designed to shutoff 
abruptly when the 
charge is depleted

Allow battery pack to cool
down. 

Place on charger 
and allow to charge.

Maintenance

Your STANLEY FATMAX tool has been designed to operate 
over a long period of time with a minimum of maintenance. 
Continuous satisfactory operation depends upon proper tool 
care and regular cleaning.
Your charger does not require any maintenance apart from 
regular cleaning.

 

@

Warning!

 Before performing any maintenance on 

the tool, remove the battery from the tool. Unplug the 
charger before cleaning it.

 ● Regularly clean the ventilation slots in your tool and 

charger using a soft brush or dry cloth.

 ● Regularly clean the motor housing using a damp cloth.
 ● Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Z

Separate collection. Products and batteries marked 
with this symbol must not be disposed of with 
normal household waste.

Products and batteries contain materials that can be 
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to 
local provisions. Further information is available at
www.2helpU.com

Technical data

SFMCD711

Voltage

V

DC

18V

No-load speed

Min

-1

0-350/0-1500

Max. torque

Nm

50

Chuck capacity

mm

13

Max Drilling capacity

Steel/wood

/

masonry

mm

13/35/13

Weight

kg

1.2

Charger

SFMCB11

SFMCB12

SFMCB14

Input Voltage

V

AC

230

230

230

Output Voltage

V

DC

18

18

18

Current

A

1.25

2

4

Battery

SFMCB201 SFMCB202

SFMCB204 SFMCB206

Voltage

V

DC

18

18

18

18

Capacity

Ah

1.5

2.0

4.0

6.0

Type

Li-Ion

Li-Ion

Li-Ion

Li-Ion

Level of sound pressure according to 

EN62841

:

Sound pressure (L

pA

) 86.5 dB(A), uncertainty (K) 5 dB(A)

Sound power (L

WA

) 97.5 dB(A), uncertainty (K) 5 dB(A)

Vibration total values (triax vector sum) according to 

EN62841

:

Drilling into metal (a

h, D

) 2.1 m/s

2

, uncertainty (K) 1.5 m/s

2

Impact drilling into concrete (a

h, ID

) 10.1 m/s

2

, uncertainty (K) 1.5 m/s

2

Содержание FATMAX SFMCD711













Отзывы: