8
ENGLISH
(Original instructions)
9
ENGLISH
(Original instructions)
u
In particular clean the air vents (1) after every use with a
cloth and brush.
u
Remove stubborn dirt with high pressure air (max. 3 bar).
Note:
Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product as
they might be harmful to its surfaces.
u
Check for worn or damaged parts. Replace worn parts
as necessary or contact an authorised service centre for
repair before using the product again.
Maintenance
u
Before and after each use, check the product and
accessories (or attachments) for wear and damage. If
required, exchange them for new ones as described in this
instruction manual. Observe the technical requirements.
Repair
This product does not contain any parts that can be repaired
by the consumer. Contact an authorised service centre or a
similarly qualified person to have it checked and repaired.
Storage
u
Switch the product off and disconnect it from the power
supply.
u
Clean the product as described above.
u
Store the product and its accessories in a dark, dry, frost-
free, well-ventilated place.
u
Always store the product in a place that is inaccessible to
children. The ideal storage temperature is between 10°C
and 30°C.
u
We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Transportation
u
Switch the product off and disconnect it from the power
supply.
u
Attach transportation guards, if applicable.
u
Always carry the product by its handles (2).
u
Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
u
Secure the product to prevent it from slipping or falling
over.
Troubleshooting
Suspected malfunctions are often due to causes that the
users can fix themselves. Therefore check the product using
this section. In most cases the problem can be solved quickly.
Problem
Possible Cause
Solution
Product does not start
Not connected to power
supply
Connect to power
supply
Power cord or plug is
defective
Check by a specialist
electrician
Other electrical defect to
the product
Check by a specialist
electrician
Product does not
reach full power
Extension cord not suitable
for operation with this
product
Use a proper
extension cord
Power source (e.g.
generator) has too low
voltage
Connect to another
power source
Air vents are blocked
Clean the air vents
Unsatisfactory
result
Stirrer is worn
Replace with new
one
Stirrer not suitable for
material to be mixed
Use proper stirrer
Содержание Fatmax FME190
