5
OPERATION
WARNING:
Before attempting any of the
following operations, make sure that the tool is
switched off and unplugged and that the saw blade
has stopped. Used saw blades can be hot.
BLADE INSTALLATION (FIGURE B)
- Push the saw blade locking lever (3) upward.
- With teeth facing forward, insert the shank of the
saw blade into the blade holder as far as it will go.
- Release the lever.
- Check to ensure blade is secure before cutting.
ADJUSTING THE SHOE FOR BEVEL CUTS (FIGURE C)
WARNING:
Neverusethetoolwhentheshoeislooseorremoved.
Theshoeplatecanbesettoaleftorrightbevelangleofupto45°.
To set the bevel angle:
-Pulltheshoebevelinglever(7)outandawayfromthesawtounlocktheshoe(6)asshownin
figure C
.
-Slidetheshoeforwardtoreleaseitfromthe0°positivestop
position.
-Theshoecanbebeveledtotheleftortotherightandhas
detentsat15°,30°and45°.
-Settheshoetothedesiredbevelangle.Useaprotractorto
verifyangleaccuracy.
-Pushtheshoebevelingleverbacktowardsthesawtolock
theshoe.
To reset the shoe for straight cuts:
-Pulltheshoebevelinglever(7)outandawayfromthesaw
tounlocktheshoe(6)asshownin
figure C
.
-Rotateshoetoanangleofapproximately0°andthenpull
shoebackwardstoengagethe0°positivestop.
-Pushtheshoebevelingleverbacktowardsthesawtolock
theshoe.
FUNCTIONAL DESCRIPTION
1. Trigger switch
2. Lock-on button
3. Saw blade locking lever
4. Saw blade
5. Shoe sleeve
6. Shoe
7. Shoe beveling lever
8. Speed control wheel
9. Cutting action lever
10. LED Light
SAVE THESE INSTRUCTIONS
B
C
1
2
3
4
5
6
8
7
9
A
10
