Adjusting the stop-ball
The location of the stop ball can be adjusted to allow more or less hose exposed when fully rewound.
1, Pull out the hose to the desired length, ensuring the hose reel is locked ( will not rewind).
2, Loose two screws in the stop ball and move it to the desired location.
3, And tight screws in the desired location.
4, Unlock the hose
Caution:
Always make sure the hose reel is locked before removing the stop ball, and make
sure the stop-ball is securely fastened before unlocking the reel.
Care and Maintenance Tips
1, Turn off the water source and release the pressure in the hose when not in use.
2, To prevent freezing and potential damage to the hose reel, store indoors during winter months.
4, Clean the housing and hose using only mild soap and water.