5
Fig.3
1.
Press interval time button (first button on the
left) display shows “0.00”
and the bell
symbol is displayed 2.
Press plus button until
the desired setting is displayed.
3.
On releasing the button, run down of interval
time starts after the 4 - seconds time window.
Time - of - Day re-appears in the display with
the cooking pot symbol illuminated steadily.
4.
The interval time having elapsed. The acoustic
signal sounds with two beeps, pause, two
beeps etc....
OPERATION PERIOD
Note:
When setting the operation period, the
programmer automatically sets a stop which is
equal to the operation period added to the current
time. If you do not want the cooker to start
immediately, you will have to adjust the
STOP
time
accordingly.
1.
Press operation period button (second button
from left), display shows “0.00” and the cooking
pot symbol is displayed steadily.
2.
Press plus button until the desired operation
period is displayed.
3.
Releasing the button starts the run down of
time.
4.
The operation period having elapsed, the
acoustic signal sounds with four beeps, pause,
four beeps etc.. The cooking pot symbol
disappears, letters “AUTO” flash until the
manual button is pressed. The cooking pot
symbol is illuminated steadily.
STOP
(Time at which you want cooker to switch off)
1.
Press operation stop button (third button from
left), display shows “0.00” and the cooking pot
symbol is displayed.
2.
Press plus button until the desired operation
STOP is displayed (Time at which you want
oven to switch off).
3.
Releasing the buttons start run down of time,
Time - Of - Day reappears. Letters “Auto” and
the cooking pot symbol is illuminated steadily.
Operation Period starts at once.
4.
The operation period having elapsed, the
acoustic signal sounds with four beeps, pause,
four beeps etc.. The cooking pot symbol
disappears, letters “AUTO” flash until the
SETTING THE SWITCHING TIMES
To operate the appliance using the automatic
switching set the large slider to position marked
On the outer ring there are 96 small sliders, each
slider represents a time period of fifteen minutes.
The cooker switches “ON” or “OFF” depending on
the position of these sliders. When the slider is
nearest the centre of the clock it is in the “OFF”
mode, and when the slider is moved away from the
centre of the clock it is in the “ON” mode.
Switching example:
ON - Function from 18 - 22 h
OFF - Function from 22 - 18 h
POWER FAILURE
In the event of power failure, the programmer will
need to be reset, but switching times will not be
altered. If appliance does not operate normally
please refer to Fault Finding.
TIME SETTING FOR DRY MODELS ONLY
DIGITAL CLOCK PROGRAMMABLE
CONTROLLER
TO SET TIME
(
NOTE:
Cooker cannot be operated
until the time is set).
1.
When Power is applied, display flashes
“AUTO” and “0.00” alternatively.
2.
Press buttons 1 & 2 from left, “0.00” is
displayed steadily . Letters “AUTO” flash.
3.
Press plus or minus button until the actual Time
- Of - Day is displayed.
4.
When releasing the buttons Time - of - Day
starts precisely to the second --.--. The cooking
INTERVAL TIME
Note:
Interval Time does not control the cooker, it
sets off an alarm after the preset period of time.
“ is illuminated steadily.
pot symbol “
