No. D00189637B
1. Pull the supply cord from the inside of the pole into the luminaire and insert the supply cable loosing the
cable gland.
After inserting, tighten the cable gland with the following torque.
Failure to do so may result in dropped electric wires, electric shock, and electric leakage.
Tightening torque: 2.2～3.0N・m
2. Please use the 3-core cable of 60245 IEC 57 for the supply cable and be sure to crimp the terminal with
insulation cover to the tip.
3. Loosen the screw on the terminal block cover and remove the cover.
4. Connect the supply wire securely to the terminal block.
Failure to do so may result in dropped electric wires, electric shock, and electric leakage.
Tightening torque: 0.6N・m
Top cover
2. Open the top cover.
Please push down the top cover,
and remove the spring in the direction of arrow ②.
Installation of luminaire
Wiring
45～55
60245 IEC 57
3×1.0mm
2
terminal with insulation cove
Supply cable
7.5 Max
Φ6～11
N
L
3/5
Spring
①
②
Cable gland
Supply cable
terminal block cover