© 2005 Nor-Lake, Inc. 11/05 110199
DAIRY QUEEN
BLIZZARD STATION™
Installation, Operation and
Maintenance Instructions
INSPECTION
When the equipment is received, all items should be carefully checked against the bill of
lading to insure all crates and cartons have been received. All units should be inspected
for concealed damage by uncrating the units immediately. If any damage is found, it
should be reported to the carrier at once, and a claim should be filed with the carrier. This
equipment has been inspected and tested in the Nor-Lake Manufacturing Facility and
has been crated in accordance with transportation rules and guidelines. Manufacturer is
not responsible for freight loss or damage.
INSTALLATION
GENERAL
After the unit crate and crate base have been removed, locate the casters found inside
the cabinet. Attach the casters to the base of the unit by screwing them into the same
threaded fittings that were used to secure the crate base to the cabinet. Insure that the
casters are screwed all the way into the base.
LOCATION
The refrigeration system of the cabinet requires free air access for proper operation.
Bumpers have been attached to the back of the cabinet to allow for the appropriate
clearance from a wall. Once the cabinet is placed in its permanent location it should be
leveled from side to side and front to back. Fresh water and drain connections must be
made in accordance with Federal, State, and Local code requirements.
®
